User manual

page | 10
Power LED Status
The Power LED indicator on the Sender and Receiver unit provides basic information on
the current status of the 4K Ultra Extender w/ RS-232 and 2-way IR.
Sender unit LED
Status Description
Off • Sender unit is not powered.
• Check the power supply.
Solid blue • Link is established between Sender and
Receiver unit.
• The Sender unit is receiving the source signal.
Flashing
blue / orange
• Non-HDCP content is being received by the
Sender unit.
Solid orange • Sender unit is not receiving source signal from
the source device.
• Source is not connected. Check the cable
between the Sender unit and the source device.
Basic Operation Basic Operation