User manual

page | 6
Connection Instructions
► Video
1. Connect the included HDMI cable between the Ultra Hi-Def source and the HDMI port
on the Sender unit.
2. Connect an Ultra HD display to the HDMI port on the Receiver unit using another
HDMI cable.
► CAT-5
3. Connect a CAT-5e (or better) cable, up to 495 feet (150 meters) from the Link port on
the Sender unit to the Link port on the Receiver unit.
► IR
4. Refer to IR Control (page 12) for details on connecting IR devices.
► RS-232
5. Connect the included RS-232 cable from the automation device to the RS-232 port on the
Sender unit.
6. Connect an RS-232 cable from the RS-232 port on the Receiver unit to the device to be
controlled.
► Power
7. Connect the included 24V DC power supply to the power receptacle on the Sender
unit.
8. Connect the opposite end of the power supply to an available electrical outlet.
Installation
Information
Resolution will affect extension distance. 1080p Full HD can be extended up
to 495 feet (150 meters) and is limited to 8-bit color depth. 4K resolutions can
be extended up to 330 feet (100 feet). Refer to Distance Setting (page
14) for details.
Getting Started Getting Started