User manual

page | 5
Page TitleIntroduction
ID Name Description
1 Power This LED indicator will glow bright blue
and will remain illuminated as long as the
power supply is connected to the Receiver
unit. See Power LED Status (page 10)
for details on LED status messages.
2 HDMI Connect an HDMI cable between this port
and an Ultra HD display.
3 IR Ext Connect the included IR extender to this
port.
4 IR Out Connect an IR emitter (Gefen part no. EXT-
IREMIT) from this port to the IR sensor of the
device to be controlled.
5 RS-232 Connect an RS-232 cable from this port to
the RS-232 device to be controlled.
6 Link Connect a CAT-5e cable (or better), up to
495 feet (150 meters), from this port to the
Link port on the Sender unit.
Getting Started