User manual

page | 3
Page TitleIntroduction
ID Name Description
1 24V DC Connect the included 24V DC power supply
to this power receptacle.
2 Power This LED indicator will glow bright blue
and will remain illuminated as long as the
power supply is connected to the Sender
unit. See Power LED Status (page 10)
for details on LED status messages.
3 HDMI Use the included HDMI cable to connect an
Ultra Hi-Def source to this HDMI port.
4 IR In Connect a mini-mono 3.5mm cable from
this port to an automation system with an
electrical IR output.
5 IR Out Connect the included IR emitter from this
port to the IR sensor of the device to be
controlled.
6 RS-232 Connect the included RS-232 cable from this
port to the automation device.
7 Link Connect a CAT-5e cable (or better), up to
495 feet (150 meters), from this port to the
Link port on the Receiver unit.
Getting Started