Specifications

6
How to Connect the GefenToolBox 4x4 Matrix with FST
1. Use one of the provided HDMI cables to connect the source device to the
HDMI input port of the GefenToolBox 4x4 Matrix with FST.
2. Use additional HDMI cables to connect up to 4 HDMI cables to the four (4)
displays.
3. Connect the included 5V DC locking power supply to the power receptacle
on the Matrix.
4. Connect the other end of the power supply to an available power outlet.
How to Operate the GefenToolBox 4x4 Matrix with FST
The top panel of the GefenToolBox 4x4 Matrix with FST contains a set of LED
indicators, displaying which input (source) is routed to which output (display).
This allows for easy management and viewing of all input and output routing
states.
There are four (4) rows of LED indicators on the front panel. To the left of the
LED indicators are four push buttons: Out 1, Out 2, Out 3, and Out 4. The
numbers along the top of the LED matrix represent the currently selected Input
(source): 1, 2, 3, or 4.
Example 1: Routing Input (source) 2 to Output (display) 3
1. Ensure that an HDMI cable is connected from the source to HDMI In 2 and
an HDMI cable is connected from the display to HDMI Out 3 on the Matrix.
2. Press Out 3 Button on the row of black buttons running vertically until the
LED under Input 2 is bright blue. If the LED does not immediately appear
under Input 2, continue depressing the Out 3 button until the LED under
Input 2 turns bright blue (Fig 1.1).
Fig 1.1
CONNECTING AND OPERATING
THE GEFENTOOLBOX 4X4 MATRIX FOR HDMI WITH FST