Specifications

1 LED Button Press Indicator
This LED will be activated momentarily each time a button is pressed.
2 Display and Source Selection Buttons
These buttons are used to select which source is routed to a monitor.
Routing Sources using the Remote Control unit
There are a total of 16 buttons on the IR Remote Control unit. Each set of
colored buttons represents one of four Outputs on the Matrix: The fi rst four
buttons (1 - 4) represent Output 1. The second set of four buttons (5 - 8)
represent Output 2, and so on. Each numbered button within that set represents
an input: Buttons 1 - 4 represent Inputs 1 - 4 on Output 1. Buttons 5 - 8
represent Inputs 1 - 4 on Output 2, and so on.
IR REMOTE DESCRIPTION
8
1
2
RMT-16IR Remote Control Unit