User manual

page | 5
Getting Started
Panel Layout
Receiver Unit (Back)
ID Name Description
1 Host This LED will glow bright green when the
host USB device is connected to the USB
In port.
2 USB Out Connect up to two USB devices (mouse,
keyboard, camera, etc.) to these ports.
3 Link This LED indicator will glow bright green
when a CAT-7 cable is connected between
the USB Link ports on both the Sender and
Receiver unit.
4 DP Out Connect a DisplayPort cable from this port
to the display.
5 HPD Press this button to cycle the HPD line on
the Receiver unit. See Hot-Plug Detect
(HPD) for details.
6 EQ Use this EQ rotary switch to adjust the
quality of the output signal, based on
the length and type of CAT-7 cable that
is being used. See Adjusting the Signal
Quality for more information.
1 2 3 4 5 6