User manual

page | 2
Sender Unit (Front)
ID Name Description
1 USB Link Connect a CAT-7 cable between this jack
and the USB Link jack on the Receiver
unit. This RJ-45 jack must be used when
extending USB.
2 Link 1 Connect a CAT-7 cable between this RJ-45
jack and the Link 1 jack on the Receiver unit.
3 Link 2 Connect a CAT-7 cable between this
RJ-45 jack and the Link 2 jack on the
Receiver unit. Both Link 1 and Link 2 jacks
(two CAT-7 cables) must be used when
extending video resolutions up to
2560 x 1600.
Getting Started
Panel Layout
1
2 3