User manual

72
RS-232 / IP / UDP CONTROL
#show_temp Command
The#show_tempcommanddisplaysthetemperatureofeachboardwithinthematrix.

Syntax:
#show_temp


Parameters:
None
Example:
#show_temp
Temperature result [C deg] for UI board:34
Temperature result [C deg] for BP board
sensor1 (Mindspeed) - 47
sensor2 (power) - 39
Temperature result [C deg] for Inputs board
Board| 1 | 2
1|42 |34
2|39 |33
3|38 |33
4|37 |35
Temperature result [C deg] for Outputs board
Board| 1 | 2
1|51 |43
2|53 |38
3|52 |38
4|47 |39
#show_ver_data Command
The#show_ver_datacommanddisplaysthecurrenthardwareandrmwareversion.

Syntax:
#show_ver_data


Parameters:
None
Example:
#show_ver_data
Firmware Release version 0.3.38
Release date: Nov 20 2012
Release time: 15:00:38