User manual

67
RS-232 / IP / UDP CONTROL
System Commands
Command Description
#factory_reset Resetsthematrixtofactory-defaultsettings
#fadefault Resetstheroutingandmaskingtofactory-defaultsettings
#fw_upgrade Usedtoupdatethe32x32ModularMatrixrmware
#help DisplaysalistofavailableRS-232/Telnetcommands
#hpdto CyclestheHPDlineonthespeciedoutput
#lock_fo Enables/disablesthepowerlockstate
#reboot Rebootsthematrix
#show_temp Displaysthetemperatureofeachboardwithinthematrix
#show_ver_data Displaysthecurrenthardwareandrmwareversion
#show_voltage Displaystheinputandoutputboardvoltages
f Enables/disablesthe+5Vonthespeciedinput
#factory_reset Command
The#factory_resetcommandresetsthematrixtofactory-defaultsettings.
Syntax:
#factory_reset


Parameters:
None
Example:
#factory_reset
IP conguration reset to factory default
Reset to factory default, Please wait
Routing 1-1,2-2,...
Unmasked all Outputs
Loading default EDID to all locals Inputs, please wait.........
Finished Loading