User manual

66
RS-232 / IP / UDP CONTROL
s Command
Thescommandroutesthespeciedinputstoalloutputs.Donotprecedethiscommand
withthe“#”symbol.
Syntax:
s param1


Parameters:
param1   Input    [1...32]
Notes:
Ifparam1=0,thenthematrixisplacedina1-to-1routingstate.ThismeansthatInput1is
routedtoOutput1,Input2isroutedtoOutput2,andsoon.
Examples:
s 2
Input 2 is routed to all Outputs
s 0
Routing 1-1,2-2,...