User manual

63
RS-232 / IP / UDP CONTROL
#show_preset_name Command
The#show_preset_namecommanddisplaysthenameofthespeciedpreset.
Syntax:
#show_preset_name param1


Parameters:
param1   Preset    [1...16]
Example:
#show_preset_name 2
Preset 2 - Studio1
#unmaskout Command
The#unmaskoutcommandunmasksthespeciedoutputs.
Syntax:
#unmaskout param1 param2 ... param8


Parameters:
param1   Output    [1...32]

Notes:
Ifparam1=0,thenalloutputswillbeunmasked.
Example:
#unmaskout 4 5 8
Unmasked Outputs: 4 5 8
#unmaskout 0
Unmasked all Outputs