User manual

62
RS-232 / IP / UDP CONTROL
#show_input_name Command
The#show_input_namecommanddisplaysthenameofthespeciedinput.
Syntax:
#show_input_name param1


Parameters:
param1   Input    [1...32]
Notes:
Ifparam1=0,thenthenameofall32inputswillbereturned.
Example:
#show_input_name 17
Input 17 - signal_generator
#show_output_name Command
The#show_output_namecommanddisplaysthenameofthespeciedinput.
Syntax:
#show_output_name param1


Parameters:
param1   Input    [1...32]
Notes:
Ifparam1=0,thenthenameofall32outputswillbereturned.
Example:
#show_output_name 25
Output 25 - Dell_30