User manual

61
RS-232 / IP / UDP CONTROL
#set_output_name Command
The#set_output_namecommandprovidesthespeciedoutputwithaname.
Syntax:
#set_output_name param1 param2


Parameters:
param1   Output    [1...32]
param2   Name    [20charsmax.]
Example:
#set_output_name 25 Dell_30
Dell_30 is assigned to output 25
#set_preset_name Command
The#set_preset_namecommandprovidesanameforthespeciedpreset.
Syntax:
#set_preset_name param1 param2


Parameters:
param1   Preset    [1...16]
param2   Name    [20charsmax.]
Example:
#set_preset_name 2 Studio1
Studio1 is assigned to preset 2