User manual

60
RS-232 / IP / UDP CONTROL
#savepreset Command
The#savepresetcommandsavesthecurrentroutingandmaskingstatetoaspecied
preset.Torestoreasavedpreset,usethe#callpresetcommand(seepage57).
Syntax:
#savepreset param1


Parameters:
param1   Preset    [1...16]
Example:
#savepreset 2
Current routing state is saved to preset
#set_input_name Command
The#set_input_namecommandprovidesthespeciedinputwithaname.
Syntax:
#set_input_name param1 param2


Parameters:
param1   Input    [1...32]
param2   Name    [20charsmax.]
Example:
#set_input_name 17 signal_generator
signal_generator is assigned to input 17