User manual

57
RS-232 / IP / UDP CONTROL
Routing and Masking
Command Description
#callpreset Restoresthespeciedrouting/maskingpreset
#maskout Masksthespeciedoutputs
#prpreset Displaysthecurrentlistofpresets
#savepreset Savesthecurrentrouting/maskingpreset
#set_input_name Assignsaninputwiththespeciedname
#set_output_name Assignsanoutputwiththespeciedname
#set_preset_name Assignsapresetwiththespeciedname
#show_input_name Displaysthespeciedinputname
#show_output_name Displaysthespeciedoutputname
#show_preset_name Displaysthespeciedpresetname
#unmaskout Unmasksthespeciedoutputs
m Displaysthecurrentmatrixstatusintabularform
r Routesthespeciedinputtothespeciedoutputs
s Routesthespeciedinputstoalloutputs
#callpreset Command
The#callpresetcommandrestoresthespeciedrouting/maskingpreset.
Syntax:
#callpreset param1


Parameters:
param1   Preset    [1...16]
Notes:
Ifthespeciedpresetisempty,then“EmptySet”willbereturned.
Examples:
#callpreset 2
Recalling the saved touting state from preset 2
#callpreset 3
Recalling the saved touting state from preset 3
Empty Set