User manual

55
RS-232 / IP / UDP CONTROL
#sipadd Command
The#sipaddcommandsetstheIPaddressofthematrix.TheIPaddressmustbetyped
usingdot-decimalnotation.ThedefaultIPaddressforthematrixis192.168.1.75.
Syntax:
#sipadd param1

Parameters:
param1   IPaddress
Notes:
Arebootisrequiredafterusingthiscommand.

Example:
#sipadd 192.168.2.127
New IP set to: 192.168.1.205
#snetmask Command
The#snetmaskcommandsetstheIPsubnetmask.Thenetmaskmustbetypedusing
dot-decimalnotation.Thedefaultnetmaskis255.255.255.0.
Syntax:
#snetmask param1

Parameters:
param1   Netmask


Notes:
Arebootisrequiredafterusingthiscommand.

Example:
#snetmask 255.255.255.0
New IP Mask set to: 255.255.255.0