User manual

51
RS-232 / IP / UDP CONTROL
#set_tcp_term_pass Command
The#set_tcp_term_passcommandsetstheTCPterminalpassword.
Syntax:
#set_tcp_term_pass param1 param2 param3

Parameters:
param1   Oldpassword   [20charsmax.]
param2   Newpassword   [20charsmax.]
param3   Newpassword(conrm)  [20charsmax.]
Notes:
Arebootisrequiredafterusingthiscommand.
Example:
#set_tcp_term_pass Admin reindeer reindeer
TCP Terminal password updated to: reindeer
#set_tcp_term_port Command
The#set_tcp_term_portcommandsetstheTCPterminalserverlisteningport.
Thedefaultportsettingis23.
Syntax:
#set_tcp_term_port param1

Parameters:
param1   Port    [1...65535]
Notes:
Arebootisrequiredafterusingthiscommand.
Example:
#set_tcp_term_port 21
New TCP Terminal port set to: 21