User manual

50
RS-232 / IP / UDP CONTROL
#resetip Command
The#resetipcommandsetsthecurrentIPcongurationtofactory(default)
settings.
Syntax:
#resetip

Parameters:
None
Notes:
Arebootisrequiredafterusingthiscommand.
#set_http_port Command
The#set_http_portcommandspeciestheWebserverlisteningport.Thedefaultport
settingis80.
Syntax:
#set_http_port param1

Parameters:
param1   Port    [0...255]
Notes:
Arebootisrequiredafterusingthiscommand.
Example:
#set_http_port 80
New HTTP port set to: 80