User manual

49
RS-232 / IP / UDP CONTROL
IP Conguration
Command Description
#ipcong DisplaysthecurrentIPconguration
#resetip SetsIPcongurationtofactorysettings
#set_http_port SetstheWebserverlisteningport
#set_tcp_term_pass SetstheTCPterminalpassword
#set_tcp_term_port SetstheTCPterminalport
#set_udp_port SetstheUDPport
#set_udp_rip SetstheremoteUDPIPaddress
#set_udp_rport SetstheremoteUDPport
#sgateway SetstheIPaddressofthe(router)gateway
#show_tcp_term_pass DisplaysthecurrentTCPterminalpassword
#sipadd SetstheIPAddress
#snetmask SetstheNetMask
#use_tcp_term_pass Enables/disabledlogincredentials
#use_udp_access Enables/disabledUDPaccess
#ipcong Command
The#ipcongcommanddisplaysallTCP/IPsettings.
Syntax:
#ipcong


Parameters:
None
Example:
#ipcong
-------------- TCP/IP settings -------------
MAC add = 00:1C:91:02:80:2B
IP add = 192.168.1.205
Net Mask = 255.255.255.0
Gateway = 192.168.1.1
Web Server Port = 80
TCP Terminal Server Port = 23
UDP Server Port = 21
TCP Terminal password at login is set to OFF
UDP Remote IP = 192.168.2.206
UDP Remote Port = 50021
UDP Access = Enabled