User manual

48
RS-232 / IP / UDP CONTROL
#set_bank_name Command
The#set_bank_namecommandsetsthenameofthespeciedEDIDbank.
Syntax:
#set_bank_name param1 param2
Parameters:
param1   EDIDBank   [1...20]
param2   Name    [20charsmax.]
Notes:
SpacesarenotpermittedwhennamingEDIDbanks.Ifaspaceisrequired,usethe
underscorecharacter(“_”).
Example:
#set_bank_name 3 Dell_30”
Dell_30” is assigned to bank 3
#show_bank_name Command
The#show_bank_namecommanddisplaysthenameofthespeciedEDIDbank.
Syntax:
#show_bank_name param1
Parameters:
param1   EDIDBank   [1...20]
Example:
#show_bank_name 3
Bank 3 - Dell_30”