User manual

41
RS-232 / IP / UDP CONTROL
#ediddstoba Command
The#ediddstobacommandreadsthedownstreamEDIDandstoresittothespecied
EDIDbank.
Syntax:
#ediddstoba param1 param2
Parameters:
param1   Adownstreamdisplay  [1...32]
param2   EDIDbankoffset   [1...20]

Example:
#ediddstoba param1 param2
Loading Downstream EDID 25 to EDID bank 20, please wait....
Finished Loading
#ediddstolo Command
The#ediddstolo commandreadsthedownstreamEDIDandstoresittoaLocalEDID.
Syntax:
#ediddstolo param1 param2 param3...param9
Parameters:
param1   Adownstreamdisplay  [1...32]
param2 - param9  Inputlist    [1...32]


Notes:
Ifparam2=0,thenthedownstreamEDIDisstoredinall32inputs.
Example:
#ediddstolo 25 6 7
Loading Downstream EDID 25 to locals Inputs: 6 7, please wait.....
Finished Loading