User manual

40
RS-232 / IP / UDP CONTROL
#ediddetolo Command
The#ediddetolocommandstoresthedefault(Internal)EDIDtothespeciedinput(s).
Syntax:
#ediddetolo param1 param2 param3...param9
Parameters:
param1 - param32  Inputlist    [1...32]


Notes:
Ifparam1 =0,thenthedefaultEDIDwillbestoredinall32inputs.


Examples:
#ediddetolo 5 6 7
Loading default EDID to locals Inputs: 5 6 7, please wait.....
Finished Loading
#ediddetolo 0
Loading default EDID to all locals Inputs, please wait.........
Finished Loading