User manual

39
RS-232 / IP / UDP CONTROL
RS-232 / Telnet Commands
EDID Management
Command Description
#edidbatolo ReaddownstreamEDIDandstoresinanyLocalInput
#ediddetolo SettodefaultEDIDonLocalInput
#ediddstoba ReaddownstreamEDIDandstoresinEDIDBank
#ediddstolo ReaddownstreamEDIDandstoresintoaLocalEDID
#lock_edid LocksLocalEDIDanddisablesauto-loadingafterpower-up
#loedidtoba LoadsLocalEDIDtothespeciedEDIDbank
#loedidtolo LoadsEDIDtoLocalEDID
#prbaedid ReaddownstreamEDIDfrombankandsendstoserialport
#prdsedid ReaddownstreamEDIDandsendstoserialport
#predidst SpoolstheEDIDdetailstotheserialport
#prloedid ReadInputLocalEDIDandsendstoserialport
#set_bank_name SetthenameofthespeciedEDIDbank
#show_bank_name DisplaysthenameofthespeciedEDIDbank
#edidbatolo Command
The#edidbatolocommandloadstheEDIDfromthespeciedEDIDbankandwritesitto
thespeciedinput(s).

Syntax:
#edidbatolo param1 param2 param3...param9
Parameters:
param1   EDIDbankoffset   [1...20]
param2 - param9  Inputlist    [0...32]
Notes:
Ifparam2=0,thentheEDIDinthespeciedbankiscopiedtoall32inputs.
Example:
#edidbatolo 2 3 6 7
Loading EDID bank 2 to locals Inputs: 3 6 7, please wait.....
Finished Loading