User manual

16
CONNECTING THE 32X32 MODULAR MATRIX

TheGEF-MOD-32432-FM10001FOpackagecomeswith32pairs(Sender/Receiver)of
DVIFM1000Plusberopticmodules,allowingyoutoconnectaDVIsourcedeviceupto
3300feet(1kilometer)awayfromthematrix.

Virtual EDID Programming Procedure
1. Power-ontheDVIdisplayandconnecttheDVIFM1000PLUSSendermoduledirectly
totheDVIportofthedisplay.















2. Connectthe5VDCpowersupplytothepowerreceptacleontheSendermodule.
TheLEDindicatorwillbegintoashrapidly,indicatingthattheEDIDisbeing
recorded.

AftertheEDIDhasbeensuccessfullyrecorded,theLEDindicatorwillglowbright
green.








3. DisconnectthepowersupplyfromtheSendermodule.
IMPORTANT: BeforeusingtheDVIFM1000PLUSberoptic
extenders,theSendermodulemustrstbeprogrammedwiththe
EDIDfromthedisplay(sink)device.
GEF-MOD-32432-DVIFM10001FO