User manual

15
CONNECTING THE 32X32 MODULAR MATRIX
50μOM3e,OM3,and62.5μOM1multimodeberopticcablecanbeused.
However,themaximumextensiondistancewillbedependentuponthetypeofber
opticcableused.Refertothetable,below.

Fibertype MaximumDistance
multimode,50μOM3e
6600feet(2kilometers)
multimode,50μOM3
2000feet(600meters)
multimode,62.5μOM1
660feet(200meters)

3. Connectthepowersupplytothe1FOReceiverunitthenconnectthepowersupplyto
anavailableelectricaloutlet.











4. ConnectbothACpowercordsfromthematrixtoavailableelectricaloutlets.
ConnectingbothACpowercordswillprovidepowerredundancyshouldoneofthe
powersuppliesfail.ItisrecommendedtoconnecteachACpowercordtoseparate
circuits.

TheLinkindicator(ontheReceiverunit)willglowbrightgreentoindicateaconnection
betweenthematrixandtheReceiverunit.IftheLinkindicatorisOFF,theninspectthe
beropticcableforlooseconnectionsorpossibledefects.

ThePowerindicatorwillglowbrightbluetoindicatethattheReceiverunitispowered.
DVIcable
DVIdisplay
GEF-DVI-1FO-R