User manual

14
CONNECTING THE 32X32 MODULAR MATRIX
3. ConnectaDVIcablefromtheDVIOutportoneachELR-POLReceiverunittoaDVI
display.











4. ConnectbothACpowercordsfromthe32x32 Modular Matrixtoavailableelectrical
outlets.ConnectingbothACpowercordswillprovideredundancyshouldoneof
thepowersuppliesfail.Itisrecommendedtoconnecteachpowercordtoelectrical
outletsontwoseparatecircuits.

PowertotheReceiverunitisdeliveredfromthepowersupplyinthematrixoverthe
CAT-5ecableusingGefenPowerOverLine(POL)technology.TheLinkindicatorwill
glowbrightgreentoindicateasolidconnectionbetweenthematrixandtheReceiver
unit.ThePowerindicatorwillglowbrightbluetoindicatethattheReceiverunitis
beingpowered.

IfeitheroftheseLEDindicatorsareOFF,inspecttheCAT-5cableforloose
connectionsorpossibledefects.

1. Connectupto32DVIsourcestotheDVIinputsontherearpanelofthe32x32
Modular MatrixusingDVIcables.
2. ConnectasinglestrandofSC-terminated50μOM3emultimodeberopticcablefrom
eachSCconnectorontheSendercardtoeachReceiverunit,asshownbelow:
GEF-MOD-32432-DVI1FO
DVIcable
DVIdisplay
GEF-DVI-ELRPOL-R
MultimodeFiberOpticcable
Upto6600feet(2kilometers)