User manual

13


1. Connectupto32DVIsourcestotheDVIinputsontherearpanelofthe32x32
Modular MatrixusingDVIcables.
2. Connectupto32DVIdisplaystotheDVIoutputsontherearpanelofthe32x32
Modular Matrix.
3. ConnectbothACpowercordsfromthe32x32 Modular Matrixtoavailableelectrical
outlets.ConnectingbothACpowercordswillprovideredundancyshouldoneof
thepowersuppliesfail.Itisrecommendedtoconnecteachpowercordtoelectrical
outletsontwoseparatecircuits.
1. Connectupto32DVIsourcestotheDVIinputsontherearpanelofthe32x32
Modular MatrixusingDVIcables.
2. ConnectaCAT-5ecable(orbetter),upto330feet(100meters)fromeachELR-POL
jackontheSendercardtoeachoftheincludedELR-POLReceiverunits,asshown
below.

















Oncethematrixispowered,theLinkindicatorswillglowbrightgreentoindicatea
solidlinkbetweentheoutputcardandtheReceiverunit.

ThePOLindicatorswillglowbrightambertoindicatethattheReceiverunitisbeing
powered.
(Continuedonnextpage)
CONNECTING THE 32X32 MODULAR MATRIX
GEF-MOD-32432-DVI / GEF-MOD-32432-DPDVI
GEF-MOD-32432-DVIELR
CAT-5ecable
Upto330feet(100meters)