User manual

95
APPENDIX
Card Removal and Installation
Althougheach32x32 Modular Matrixissoldpre-congured,bothinputandoutputcards
canberemovedoraddedtottheneedsoftheapplication.Eachmodulecaneasilybe
removedandinstalledwithoutusinganyspecialtools.

1. Power-offthematrix.
2. Turnthematrixaroundsothatyouarefacingthebackoftheunit.




3. Loosenthefasteningscrewsonbothsidesofthecard(orcoverplate)toberemoved.
Eachcard/coverplatehastwofasteningscrews.



















STOP: Beforeinstallingmodulesandpreventtheriskofpossible
electricalshock,unplugtheACpowercordfrombackofthematrix.
IMPORTANT: ModulesaresensitivetoElectrostaticDischarge
(ESD)whichcandamagethemodule.Avoidtouchingthemodule
contactsorthecomponentsonthemodule.Alwaysholdmodules
bytheedgesorbytheknobsonthefrontofthemodule.Neverslide
amoduleoveranysurface.Wheninstalling/replacingmodules,do
notinstallaninputmoduleintoanoutputslot(orviceversa).
Thiswilldamagethematrixandvoidthewarranty.
Pullknob
Fasteningscrew