User manual

page | 20
Color Balance
1. Press the Menu button on the front panel. The Output Setup option will be
highlighted.
2. Use the Up or Dn button to highlight the Picture option.
3. Press the Menu button to access the Picture submenu. The Contrast option will be
highlighted.
4. Use the Up or Dn button to highlight the Color Balance option.
5. Press the Menu button to select the Color Balance option.
6. The Color Balance selection box will be displayed:
7. Use the Up or Dn button to switch between Red Ch., Blue Ch., and Blue Ch.
8. Press the Menu button to select the color channel to adjust.
9. Use the Up or Dn button to set the desired color balance setting.
10. Press the Menu button to conrm the change and return to the Picture submenu.
11. Use the Up or Dn button to select the <- Back option.
12. Press the Menu button.
13. Use the Up or Dn button to select the Exit option
14. Press the Menu button to exit the main menu.
Basic Operation
Menu System
Gefen
Converter
----------------
1.Output Setup
2.Picture
3.Adjustment
4.System
5.Test Patterns
6.Exit
Contrast
Brightness
Saturation
Hue
Color Range
Color Temp.
Color Balance
Edge Enhance
Sharpness
<- Back
[ Red Ch. 50 ]
Color Balance
[ Blue Ch. 50 ]
Color Balance
a a
Basic Operation