User manual

4
CONNECTING AND OPERATING THE VGA TO DVI SCALER PLUS
How to Connect the VGA to DVI Scaler Plus
Connect your analog video card to the HD-15 female connector at the input side of
the VGA to DVI Scaler Plus. (Note: The Menu button of the VGA to DVI Scaler Plus
will not work without a source plugged in)
Connect the DVI (M-M) cable between the DVI connector on the digital display and
the DVI output of the VGA to DVI Scaler Plus.
Connect the power supply.
*Note: The default resolution of the VGA to DVI Scaler Plus is NATIVE mode,
meaning that the Scaler's DVI output matches the default native resolution of your
display.
Operating the VGA to DVI Scaler Plus
Button Function
MENU Shows and Hides the On Screen
Display (Menu) and Item Selection
+
Moves menu cursor DOWN the menu /
Increases adjustment values
-
Moves menu cursor UP the menu /
Decreases adjustment values
Hold MENU and unplug and re-plug the
power source. Afterwards, you can
release the MENU button.
Resets the Scaler back to the
NATIVE resolution of the display
Auto Adjust
Press the
- button
Tunes the picture to display
optimum settings
Output resolutions that are supported:
VGA 480I 576I WXGA
SGA 480P 576P WSXGA
XGA 720P/60 720P/50 WUXGA
SXGA 1080I/60 1080I/50 2K/60
UXGA 1080P/60 1080P/50 NATIVE