User manual

5
PANEL DESCRIPTIONS
1 Infrared Sensor
Point the supplied remote control at this port to access.
2 Power LED
When this is lit, the unit is powered on.
3 5V DC Locking Power Input
Connect the supplied low-voltage power supply cord into this socket.
4 Genlock (Reference) Input
Connect Genlock signal here.
5 Analog Audio Output
Connect left and right channel analog audio amplifi er here.
6 HD-SDI Dual-Link Input
Input HD-SDI here.
7 HD-SDI Dual-Link Loop Output
Connect the loop output here.
8 HD-SDI Dual-Link Input
Input HD-SDI here.
9 HD-SDI Dual-Link Loop Output
Connect the loop output here.
10 DVI Output
Connect the display output here.
11 RS-232 Input
Connect RS-232 control cord here.