User manual

11
RMT-8HDS-IR INSTALLATION
On power up, the HDSDI to DVI Plus Scaler will automatically detect the input
format of the input. The unit is controlled using the included 8-button remote.
Pressing the OUTPUT button cycles the HDSDI to DVI Plus Scaler through the
following output modes: 640x480 - 800x600 - 720p - 1080i
Other functions and output modes can be accessed through the on-screen menu
(To Restore I/O settings, simply recycle power on the Scaler).
To bring up the on-screen menu, press the MENU button. Navigation is done
using the UP, DOWN, LEFT, RIGHT and ENTER buttons.
The SOURCE button selects the input source (Input 1 or Input 2).
Note: Both DIP switches under the remote battery cover must initially be in the
OFF position to communicate with the Scaler (for more information, please see
the RMT-8HDS-IR Installation instructions on page 12).