User manual

8
MENU FUNCTIONS
Clean Aperture:
• Horizontal and Vertical Size:
Stretch image Horizontally or Vertically
• Horizontal and Vertical Position:
Move image in view port Horizontally or Vertically
• Audio:
Selects which audio pair to use for audio output (1 - 8)
Default setting is Channel 1.
• Remote Channel:
Changes the IR code of the HDSDI to DVI Plus Scaler to one of four
different settings between 0 and 3. When the remote channel is changed,
the DIP switches on the RMT-8HDS-IR remote must correspond to the I/R
channel used by the HDSDI to DVI Plus Scaler (please see RMT-8HDS-IR
Installation on page 12 for more information).
Output:
• Video Output Format: Select the desired HD output resolution (please see
Supported Input/Output Resolutions on page 10 for more information).
• Graphic Output Format: Select the desired computer output resolution.
(Please see Supported Input/Output Resolutions on page 10 for more
information).
Custom Output Format:
• V and H Total Pixels:
Total Horizontal and Vertical pixels for the DVI monitor.
• V and H Total Active Pixels:
Total Horizontal and Vertical active pixels to be displayed.
HSync and VSync Backporch:
HSync and VSync Width:
• Refresh Rate:
Change custom Refresh Rate: 20-85.
• Frame Rate:
48, 50, 59.94, 60, 75, and 85Hz.
• Sync Adjust:
Horizontal and Vertical Sync Adjust (0-3 with Default: 0)