® 1.3 Over Fiber with IR EXT-HDMI1.3IR-FO-141 User Manual www.gefen.
ASKING FOR ASSISTANCE Technical Support: Telephone Fax (818) 772-9100 (800) 545-6900 (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday PST Write To: Gefen LLC c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 www.gefentv.com support@gefen.com Notice Gefen LLC reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. HDMI 1.
TABLE OF CONTENTS 1 Introduction 2 Operation Notes 3 Features / Package Includes 4 Sender Panel Descriptions 5 Receiver Panel Descriptions 6 Connecting and Operating the HDMI 1.
INTRODUCTION Congratulations on your purchase of the HDMI 1.3 Over Fiber with IR. Your complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies.
OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE HDMI 1.3 OVER FIBER WITH IR • Use one SC terminated multi-mode fiber optic cable and one industry standard CAT-5, CAT-5e or CAT-6 cables to operate the HDMI 1.3 Over Fiber with IR. Gefen recommends CAT-6 cabling for maximum performance. • For 1080p video, maximum extension is 1000 feet (330 meters). • IR repeater functionality is only from the receiving unit to the sending unit.
FEATURES Features • Immune to electro-magnetic interference (EMI) • Transmits HDMI 1.
SENDER PANEL DESCRIPTIONS Front Panel IR Blaster Power LED Output Port Indicator HDMI Input RS-232 Input Back Panel RJ-45 Port SC Fiber Optic Port 4 5V DC Power Input
RECEIVER PANEL DESCRIPTIONS Front Panel HDMI Output RS-232 Output IR Receiver Power LED Indicator Back Panel RJ-45 Port SC Fiber Optic Port 5 5V DC Power Input
CONNECTING AND OPERATING THE HDMI 1.3 Over Fiber with IR 1. Connect the HDMI source to the HDMI 1.3 Over Fiber with IR sending unit’s HDMI input port using the supplied HDMI cable. 2. Connect the RS-232 source to the HDMI 1.3 Over Fiber with IR sending unit’s RS-232 input port using the supplied DB-9 serial cable. 3. For IR repeater functionality, please connect the IR emitter’s mini-jack (sold separately, part # EXT-2IREMIT) into the HDMI 1.3 Over Fiber with IR sending unit.
NETWORK CABLE WIRING DIAGRAM Gefen has specifically engineered their products to work with the TIA/EIA-568-B specification. Please adhere to the table below when field terminating cable for use with Gefen products. Failure to do so may produce unexpected results and reduced performance. Pin Color 1 Orange / White 2 Orange 3 Green / White 4 Blue 5 Blue / White 6 Green 7 Brown / White 8 Brown 12345678 CAT-5, CAT-5e, and CAT-6 cabling comes in stranded and solid core types.
SPECIFICATIONS Video Amplifier Bandwidth ........................................................................ 340 MHz HDMI Input/Output Connector ........................................................... type A, 19 pin Link Connector ................................................................................ SC Fiber Optic CAT5 Connector ............................................................................................. RJ45 Input Video Signal ...........................................
9
Rev X3 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 www.gefentv.com fax: 818-772-9120 support@gefen.
