User`s manual

READ THESE NOTES BEFORE INSTALLING OR

OPERATING THE DVI CAT5 4X EXTENDER

• The DVI CAT5 4X Extender and DVI CAT5 MSR units are housed in a metal

box for better RF shielding.

• The maximum cable extension is 300 feet (91 meters) for video resolutions

of 1080i and below.

• The maximum cable extension is 150 feet (45 meters) for video resolutions

of 1080p.

• If EMI is present anywhere near the RJ-45 video cable runs, it may

be necessary to use shielded RJ-45 cable. This is to prevent possible

interference from degrading the video signal. Using shielded cable, however,

will reduce the maximum distance that the RJ-45 cable can be run.

• Extensions under 130 feet can use Auto EQ (which is on by default).

Extensions over 130 feet will require you to manually EQ your signal (see

page 5).

• Each cable run must be one continuous run from one end to the other. No

splices or use of punch down blocks.

• High quality CAT-6a cabling should be used for maximum performance.

• Do not use stranded or low/no skew cabling. Solid core cabling should be

used for maximum performance.

• HDCP Compliant.

OPERATION NOTES