User manual

21
APPENDIX B
Example: #FunctionName_param1_param2_param3_param4…\r
Set Preset Routing State
This function enables the user to determine up to 10 routing states to save in
memory.
#PSASRS_param1_param2_param3_param4_param5_param6_param7_
param8_param9\r
Parameter Name Value
1 Routing state [0:9]
2 Input route to MONITOR A [1:8]
3 Input route to MONITOR B [1:8]
4 Input route to MONITOR C [1:8]
5 Input route to MONITOR D [1:8]
6 Input route to MONITOR E [1:8]
7 Input route to MONITOR F [1:8]
8 Input route to MONITOR G [1:8]
9 Input route to MONITOR H [1:8]
Set Current Matrix As Routing State
#MSASRS_param1\r
Parameter Name Value
1 Routing state [0:9]
Print Routing State Table
#PRRS\r
Mask Outputs
This function masks the output by by setting the DS HPD to low.
#MASK_param1[_param2][_param3][_param4][_param5]
[_param6][_param7][_param8]\r
Parameter Name Value
1 (2-8 optionally) MONITOR [A : H]