User manual

page | 10
DIP Switch Conguration
Basic Operation
Basic Operation
On the bottom panel of the Sender unit is a bank of 4 DIP switches. Remove the piece of
colored tape to reveal the DIP switch bank. These DIP switches provide control over EDID
management and color depth. DIP switches 3 and 4 are not used.
Default Settings
The following table lists the default (factory) settings of each DIP switch. See the following
page for details on each DIP switch function.
DIP Switch Description
1 ON
Uses pass-through (downstream)
EDID mode
2 OFF
Deep color is disabled.
5V DC
Power DVI In
Link
EXT-DVI-1CAT6-GIS
Gefen
CTS
117
219
ON
1 2 3 4
5V DC
Power DVI In
Link
EXT-DVI-1CAT6-GIS
Gefen
CTS
117
219
ON
1 2 3 4
1 2 3 4
ON
219
117
CTS