User manual

page | 3
Page TitleIntroduction
ID Name Description
1 Link Connect a CAT-5e cable (or better) from this
port to the Link port on the Receiver unit.
2 5V DC Connect the included 5V DC power supply to
this power receptacle.
3 Power This LED will glow bright blue once the
included 5V DC power supply has been
properly connected between the locking
power receptacle and an available
electrical outlet.
4 DVI In Connect the included DVI cable between
the imaging source (e.g. imaging camera)
and the DVI In port.
5 Grounding Terminal Connect a grounding wire from this terminal
to an approved Earth ground. The grounding
wire should not be less than 16 AWG.
Getting Started