1:2 Component Audio Over CAT5 User Manual

READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE 1:2 COMPONENT AUDIO OVER CAT5
Use only industry standard Category-5 Enhanced (CAT-5e) cable to operate •
the 1:2 Component Audio Over CAT5. Cat-6 cables can also be used.
Unit will convert digital audio to analog audio and analog audio to digital audio. It •
will not however down-mix multichannel digital audio tracks to analog 2 channel.
Please see page 8 for additional information.
Both the sending and receiving units must be powered with the supplied power •
adapters for proper operation.
Field termination of CAT5e cabling must adhere to the TIA/EIA-568-B •
specifi cation. Please see page 10 for additional information.
2
OPERATION NOTES