User manual

RS-232 SERIAL COMMANDS

RS232 Settings

Bits per second ............................................................................................ 19200

Data bits ............................................................................................................... 8

Parity ............................................................................................................. None

Stop bits ................................................................................................................1

Flow Control .................................................................................................. None

Audio Commands

54321

9876

12345

6789

Only Pins 2 (RX), 3 (TX), and 5 (Ground) are used on the RS-232 serial interface

Command Description

ADELAY Sets the audio delay

AENHNCE Improves the speech intelligibility

AIN Selects the audio input source

BASS Increases or decreases the bass

DFL Sets the distance for the Front Left speaker

DFR Sets the distance for the Front Right speaker

DRC Adjusts the Dynamic Range Control

DSB Sets the distance of the Subwoofer

FLR Sets the size of the Front Left / Front Right speakers

LFV Sets the Left Front speaker volume

MUTE Enables / disables audio muting

RTV Sets the Right Front speaker volume

SUB Enables / disables the subwoofer

SUBV Adjusts the subwoofer volume

SUBX Sets the crossover frequency

TREB Increases / decreases the treble

VOL Increases / decreases the overall output volume