User manual

1- Connect the cables from your ﬁ rst computer into the DVI 1.1, DVI 1.2, USB and

Audio inputs in the back of the 2x2 DVI DL Switcher.

2- Connect the cable from your second computer into the DVI 2.1, DVI 2.2, USB and

Audio inputs in the back of the 2x2 DVI DL Switcher.

3- Connect the monitors to the DVI Out 1 & 2.

4- Plug the 5v power supply into the 2x2 DVI DL Switcher.

5- Plug the 5v wallmount power supply into the wall outlet.

6- Start your computers only after you’ve made all the connections.

7- Press either one of the source selector buttons shown on page 2 to switch between

Computer 1 or Computer 2. You can also switch between sources using the RMT-2IR.

Switch remotely using the optional RMT-4 contact closure remote control.

HOW TO CONNECT THE 2x2 DVI DL SWITCHER