Instructions / Assembly

54
04.
The Geeni app will try to
connect your device.
NOTE: Geeni can’t connect to
5GHz networks.
*If the connection fails, try to
connect using AP Mode.
03.
Enter your Wi-Fi
network and password.
02.
Make sure the indicator
light is flashing quickly,
indicating it’s ready to
connect. If not, hold the
reset button until it’s
flashing. Press “Next
Step.”
Add device:
Backup AP Mode
01.
Make sure the device is in
AP Mode, blinking slowly
*see reset instructions
on p. 5
02.
In the Geeni app, on the
top corner of the Devices
screen, click
Choose “Smart Lighting”
Choose “AP Mode” in the
top corner.
03.
Click Next and enter your
Wi-Fi details.
04.
Follow the instructions
to choose the device
from your Wi-Fi list.
05.
The device will connect.
NOTE: Geeni can’t
connect to 5GHz
networks.
*How do I reset the device and
what does the blinking light
mean?
Reset the LED strip by pressing
& holding reset button.
• Reset once (Press & hold reset
button) to reach Easy Mode,
which is the primary way the
app will try to connect. (When in
Easy Mode, you’ll see the LEDs
flashing quickly, 2x per second)
- Reset again (Press & hold
reset button) to reach AP Mode,
which is the Backup Mode to
help connect. (When in AP Mode,
you’ll see the LEDs blinking
slowly, every 3 seconds)
flashing
slowly
Reset Button
Press: Turn On/Off
Press & Hold: Reset
LEDs flashing quickly : Easy Mode
LEDs blinking slowly : AP Mode
Connect (AP Mode)Connect (Easy Mode)
flashing
quickly
01.
In the Geeni app, on
the top corner of the
Devices screen, click
Choose “Smart Lighting”.
STEP 3
Add device:
Easy Mode