Instructions / Assembly

32
Prepare
01.
Plug the device into the wall.
Make sure the indicator light on the device is flashing
rapidly, indicating the device is ready to connect.
*See reset instructions on p. 5
Plug In
STEP 2
Prepare
03.
Measure the LED strip for the desired length, starting
at the end closest to the connector
for the Wi-Fi Controller.
IMPORTANT: If you measure & cut
from the opposite end, you will not be able to
connect the LED strip to the Wi-Fi Controller.
02.
Measure the area you wish to attach the LED strip to.
Ensure that the area has a clean, solid surface.
+
C
G
R
B
W
+
C
G
R
B
W
+
C
G
R
B
W
04
Located the closest cut mark to
your desired length. Each strip has
cut markings located every 10cm.
Take a sharp pair of scissors or
blade, and cut along the cut mark.
05
LED Strip Adhesive Installation
*Follow Instructions Carefully
Be sure to thoroughly clean surface or wall with any standard
rubbing alcohol before applying adhesive and let dry.
Peel adhesive lining from the back of the strip light.
Position LED strip upon surface and press every section firmly for at
least 30 seconds ensuring a strong hold.
NOTE:
3M adhesive may not adhere well to vinyl surfaces nor to delicate wallpaper.
Installation Using Anchor Mounts
If you would like, you may utilize the included anchor mounts for an
additional hold. Each mount can be screwed into the wall with a
standard Phillips-head screwdriver (not included) or using the 3M
adhesive backing.
The LED light strip light can be placed along each mount and then
locked in place with the strap.
+
C
G
R B
+
C
G
R B
+
C
G
R B
+
C
G
R B
+
C
G
R B
+
C
G
R B
+
C
G
R
B
W
LED Input
LED Strip
Power Adapter
Wi-Fi Controller
Reset Button
Press: Turn On/Off
Press & Hold: Reset