WIRELESS HANDHELD VACUUM CLEANER INSTRUCTION MANUAL G230 For any questions and malfunctions of the appliance during use, please contact our customer service email: usa@igeemo.
CONTENT IMPORTANT SAFEGUARDS 01 OVERVIEW 02 PART INSTALLATION INSTRUCTIONS 03 DESCRIPTION OF PRODUCT USE 04 DAILY MAINTENANCE OF THE PRODUCT 07
Important Safeguards Before using this product, read the following safety instructions and follow all normal safety precautions, any actions that do not comply with this instruction may result in damage to the product. *This product is not intended for use by persons with physical, sensory or intellectual disabilities or persons with inexperience and common sense ,including children, unless they are supervised or directed by others to ensure their safe use.
Overview Dust cup latch Dust cup Tube Floor brush Switch Main unit Crevice tool 2 in 1 brush Adapter Specifications Model G230 Input 100-240V/50-60Hz Output 26V/800mA Battery Voltage 22.2V Rated Power 230W Standard Mode 10kpa/30min High mode 21kpa/13min Charging time 2.
Part installation instructions Host direct access to attachments *Depending on the area to clean, insert the attachment directly into the host port after a reasonable selection of the attachment. Main unit + tube + accessories First the tube is inserted into the main unit, and according to the area to be cleaned, the accessories is inserted directly into the other end of the tube after a reasonable selection of the accessories.
Description of product use Product charging Power LIGHT Plug the adapter into the wall socket, then the end of the adapter is inserted into the machine charging jack, and the charging light flashes in turn. About the LED. Product work The number of lights on three indicators indicates how much the battery is consuming when the appliance is charging. The number of lights on three indicators indicates how full the battery is when the product is fully charged.
Work begins Press the machine switch button, the machine low-grade operation, and then press the switch button, the machine high-end operation, and then press the button, the machine shut down, so cycle, as needed to suck up the type of garbage, reasonable choice of machine gear. Switch high and low button Take out dust One hand to hold the dust cup, one hand press the host on the dust cup remove button, you can take off the dust cup.
Remove the middle HEPA filter and the dust can be empty. Remove HEPA Empty the dust Dust cup: Please dump the dust in the dust cup regularly. HEPA filter: Please clean the HEPA filter regularly and replace it with new one once 3~6 months.
Daily maintenance of the product Product maintenance To maintain product performance, it is recommended that you maintain the machine and components Main unit Please let the machine stop working before cleaning. Tube the surface of the main unit with water or neutral detergent and do not seep water into the body. Dust cups and filtration components It is recommended to clean the dust in the dust cup regularly.
Troubleshooting Common fault analysis and handling FAULT The vacuum cleaner does not work POSSIBLE CAUSES THE SOLUTION Battery low Charging the battery The suction port is blocked Clean up the product vacuum Filter ingress with dust。 Clean dust cups and filtration components Filter, Hepa, blocked Clean up or replace filtered hepas The motor is running with a different sound Blocked vacuum tube or filtration components Clean extension tubes or filtering components The appliance cannot be charg
