Cordless Telephone Owner's Manual

Call Barring Call barring lets you block outgoing calls to certain types of telephone numbers. Telephone numbers beginning with the numbers you specify can not be dialled if call barring is activated. You can set up to 4 different restricted numbers containing up to 4 digits each. When activated, the message
BARRING is displayed in the LCD
display when the restricted number is dialled. To Activate a Call Barring Number
Press to activate the menu
Use S and T to scroll through the menu to select
‘BASE MENU’
Press OK
Use the keypad to type in your PIN (default 0000)
Press OK
Press OK to access ‘CALL BAR’
Use S and T to scroll through the 4 call bar memory locations (1-
4) until you find the required memory location
Using the keypad, enter the desired number (up to 4 digits)
Press OK to save the number and return to standby
Receiving a Call When an incoming call is received the telephone rings and the icon will
flash on the LCD display. If the caller can be identified (due to subscription to a Caller Display service), the caller’s telephone number will be displayed.
Press any button to answer
Or
If the handset is in the base , simply lift it up
To end the call simply press or replace the handset on the base
Mute Function If you wish, you can speak privately to someone else in the room without your caller overhearing. You will still be able to hear the caller but they cannot hear you during the mute operation.
During a call, press
The LCD display will show which indicates that your voice is
muted to the call and the caller cannot hear you speaking
Press again to resume the coversation. The symbol will
disappear from the LCD display
USING THE TELEPHONE
31
USING THE TELEPHONE
Telephone
number
Flashing
26