Operation Manual

31
Dial Mode Setting
In the UK, all telephone exchanges now use Tone dialling. The
dial mode setting is pre-set to Tone.
If your telephone does not dial out, it is probably being used from
an older private switchboard (PBX). In this case, the dial mode
must be changed to Pulse.
Press (left side) to activate the menu
Use and to scroll through the menu to select
‘BS SETTING’
Press (left side) to confirm
Use and to scroll through the menu to select
‘DIAL MODE’
Press (left side) to confirm
Use and to scroll through the menu to select
‘TONE’or ‘PULSE’.
Press (left side) to confirm. Either press to
return to standby or wait 30 seconds
BASE SETTINGS