Operation Manual

Using the External Microphone

Plug the supplied desktop microphone into the MIC JACK at the

back of unit. The external microphone will now override the

built-in microphone. The magnetic field LED indicator will light

up blue when you speak to the built-in microphone or external

microphone.

NOTE: When the external or Internal microphones are in use,

the blue LED light flashes with an intensity depending on the

strength of the transmitted magnetic signal through the loop.

Using the Audio Input

The LoopHEAR

can transmit sound through the loop from an

external audio source like a TV set , MP3-4 , computer.

Connect your audio equipment to the 3.5mm socket

(blue) on rear panel of your LoopHEAR

. You will

then hear the magnetic signal when you are within 1

meter of the LoopHEAR

with your hearing aid in

the “T” position.

USING THE LoopHEAR