Operation Manual

L I N E S I M I L A T O R
Tester
User manual p.1
Notice d’utilisation p.3
Installation :
- Plug the power cable into the power socket on the rear of the base.
- Plug the adaptor into the mains supply (*).
- Connect the first line cord plug to the line socket of the telephone 1.
(Only use the telephone line provided)
- Connect the other end of the line cord plug to the line socket 1 on the rear
of the Tester.
- Connect the second line cord plug to the line socket of the telephone 2.
- Connect the other end of the line cord plug to the line socket 2 on the rear
of the Tester.
Now your system is ready to be used.
Using :
With 2 telephones connected:
Lift one handset, now you have the following possibilities :
- Press the 1 button of the telephone to do the second telephone ring.
- Press the 2 button of the telephone to hear the busy tonality.
- Press the 3 button of the telephone to hear the audio input if connected.
- Press to do ringing alternatively the two telephones.
Note:
- You have also the possibility to plug just one telephone.
- To connect an audio input use a cable with a 3.5mm plug connected on the
“AUDIO IN” on the rear Tester. You can use a CD player or other any other
musical source.
(*) Classified “hazardus voltage” according to EN60950 standard
1
This Tester is designed to be used with the Geemarc CLEARSOUND
products. Some of other products can not fully works.
Ce Tester est prévu pour fonctionner avec les produits de la gamme
Geemarc CLEARSOUND. Certains autres téléphones peuvent ne pas
fonctionner.