Telephone
INDEX INSTALLATION………………………………………………………….…….….3-4 CHECK THE CONTENTS OF THE BOX………………………...…....…….3 BATTERIES INSTALLATION……………………………………………….…3 CONNECTING LINE CORDS…………………………………………………3 CONNECTION THE ADAPTOR………………………………………………4 DESCRIPTION…………………………………………………………….…….. 5-7 GENERAL DESCRIPTION……………………………………………………..5 LCD SCREEN…………………………………………………………………..6 RECEIVING CALL RECORDS………………………………………………...6 LCD MESSAGES……………………………………………………………….7 SETTINGS……………………………………………………………………….
INSTALLATION CHECK THE CONTENTS OF THE BOX Your box contains: • Jupiter50 unit • Handset with curly cord • Line cord • User Guide BATTERIES INSTALLATION The caller ID phone requires four 1.5V AA size batteries for LCD Display (batteries are not supplied). • Remove the battery cover from the back of your Jupiter50 phone. • Insert four 1.5V AA size batteries into the compartment. • Replace battery compartment cover. You can also insert adaptor for LCD display.
INSTALLATION CONNECTING THE ADAPTOR Connect the adaptor plug to the adaptor socket located on the back of your Jupiter50 next to the line cord socket. Then connect the adaptor to the wall socket (classified “hazardous voltage” according to EN60950 standard). Please choose an adaptor wall socket near your line plug to enable you to unplug the adaptor quickly in case of a problem. Note: The adaptor is required for the telephone to work properly. Batteries are necessary in case of network power failure.
DESCRIPTION GENERAL DESCRIPTION LCD Display Flashing Incoming Call Indicator Memory Selection key Time Set Key Direct Memory Memory Set Key Mute Volume Reception Adjustment Buttons Speaker - Hands Free Dialing and Amplifier Time Break Recall Button Last Number Redial Key / Pause SS Up/Down Selection keys X OK ok ´ Validation Key T T Delete/Cancel/Exit Key Phone Book 5
DESCRIPTION LCD SCREEN Screen example (incoming call position) : time date number of call records received caller’s name caller’s number RECEIVING CALL RECORDS A caller ID record consists of the following information: Number of call records received, time and date of the call Total calls and current date Caller’s number Caller’s name 6
DESCRIPTION Your Jupiter50 LCD screen displays different messages which help you to use the telephone. Examples of messages and their location on the screen: TOTAL & NEW CALLS – this shows you the total number of calls and the number of new calls to be reviewed. In this example, you have a total of 10 calls which includes 2 new and it is Monday. NO CALLS – when all calls have been deleted, the display will show NO CALLS.
SETTINGS Your Jupiter50 contains the following special functions: • Language select • Time set • Area & long distance code setting • Phone book LANGUAGE SELECT Jupiter50 supports multi languages, including English1, Greek, Czech, Slovak, Turkish, English2, Spanish, Nederland, French, German, Polish, Swedish, Danish, Finnish and Norwegian. To access language select perform the following steps when the handset is in the cradle: 1. Whilst holding down the X and the OK buttons press the S key once. 2.
SETTINGS AREA & LONG DISTANCE CODE SETTING Your telephone needs to distinguish between local and long distance calls. First of all you have to program your area code: Press X button together with T button and hold them both for 2-3 seconds until the display shows “SET AREA CODE”. Use T and S buttons to select the correct area code. Press OK button to pass from one digit to another. When the area code setting has been completed, press OK button once – the display will show “SET LDS CODE”.
SETTINGS REVIEWING PHONE BOOK NUMBER/NAME 1. 2. 3. Press key once and the unit will show the last phone book name and number. Use T and S to review the entries of your phone book. You can also quickly find the number by name by pressing the first letter of the stored name. To review the entries by their location in the phone book, with the phone in the on-hook position press the location number + #, e.g.
USING THE TELEPHONE RINGER LEVEL ADJUSTMENT You can change the ringer volume to the desired level. To have the maximum ringer volume, move the ringer switch on the back of your Jupiter50 to (big bell icon) position. If you prefer a gentle ring, move the ringer switch to (small bell icon) position.
USING THE TELEPHONE MAKING A CALL 1. Lift the handset 2. Await the dial tone and dial required number (it will be displayed on the screen). 3. On completion of the call, carefully replace the handset in the cradle to release the line. OR You can also use the HANDS FREE function to make a call. 1. Dial the required number in the on-hook position. 2. Press the ; key and the number will be automatically dialed. 3. When the person answers you, speak with the phone in the hands free mode.
FUNCTIONS MUTE FUNCTION If you wish, you can speak privately to someone else in the room without your caller overhearing. You will still be able to hear the caller but the caller cannot hear you during the mute operation. To switch on the mute mode during a call just press once. Your caller will not hear you anymore. Press resume the conversation with your caller. button key again to RECALL FUNCTION This function is related to CALL WAITING telephone service.
FUNCTIONS CALL BACK FUNCTION 1. This function allows you to CALL BACK a previously dialed number. Your Jupiter50 unit can store up to 10 dialed numbers. To CALL BACK your dialed numbers you should do the following: a. In the ON-HOOK position press OK button once, then use Tand S buttons to select the number you wish to dial. b. Pick up the handset or press ; button and the phone number will be dialed automatically. 2. This function also allows you to dial the number of the person who has called previously.
MEMORY STORING A NUMBER IN ONE-TOUCH MEMORY OPTION 1: In the ON-HOOK position either lift the handset or press ; key. Then press button and the LCD will show -->. Enter the telephone number you wish to store. Enter desired one-touch memory location from M1 to M4 and the LCD will show SAVE OK. This means that the number has been stored in one-touch memory. OPTION 2: In the ON-HOOK position dial the number you want to store, then press and hold one of memory location keys M1-M4 until the LCD shows SAVE OK.
MEMORY COPYING THE NUMBERS TO ONE-TOUCH MEMORY You can copy CID or last 10 dialed numbers or phone book number to one-touch memory. When the number is shown on the LCD, press and hold one of one-touch memory keys M1-M4 until the LCD shows SAVE OK. Now the number has been stored in M1-M4 onetouch memory. DIALING A NUMBER FROM ONE-TOUCH MEMORY In the on-hook position either lift the handset or press ; key. Then press one of one-touch memory keys M1-M4 and the number stored in it will be dialed automatically.
CALLER ID SYSTEM OPERATION CALLER ID SERVICE If you have been subscribed to Caller ID service at your local telephone company, your Jupiter50 will show incoming call information on the display screen. The information includes caller name and number. Jupiter50 also provides Caller ID on CALL WAITING. Notes: 1. Caller’s name function should be supported by your Caller ID Service provider. 2. Caller ID on CALL WAITING should be supported by your Caller ID Service provider.
CALLER ID SYSTEM OPERATION REVIEWING CALL RECORDS Use S and T buttons to browse your caller list. If the incoming number is more than 13 digits, an arrow sign will appear in the right corner of the LCD, press S or T button once to review the other digits. Press S and T buttons again to pass to next call. At the end of the call record list the LCD will display END OF LIST message. Note: The storing capacity of your Jupiter50 unit is up to 66 Call Records.
CALLER ID SYSTEM OPERATION CALLER ID ON CALL WAITING CALL WAITING function works as follows: 1. A new call comes in. Caller ID info is displayed on the LCD: Caller 1 436-1234 2. Second incoming call is received. Waiting tone (beep) is heard and the Second caller info is displayed on the LCD: Caller 1 Caller 2 436-1234 291-5678 3. Press the phone hook switch or R key to put Caller 1 on hold and connect Caller 2. While you are speaking with Caller 2, Caller 1 will not be disconnected.
TROUBLESHOOTING If you are having problems with your Jupiter50, please check below for possible solutions: PROBLEM SOLUTION BLANK OR FAINT SCREEN •Check the power adapter is connected properly. •Check the batteries are in place and fully charged. CALLER ID FUNCTION DOES NOT WORK PROPERLY •Call your local telephone company to verify that your Caller ID service is activated. JUPITER50 DOES NOT RING •Verify that the Line Cord is plugged in properly.
GARANTEE From the moment your Geemarc product is purchased, Geemarc guarantee is for the period of one year. During this time, all repairs or replacements (at our discretion) are free of charge. Should you experience a problem then contact our helpline or visit our website at www.geemarc.com.
